ASK FOR A QUOTE +372 508 1126
- RIDGE CAP PRACTICE ML 4x400 mm, RAL 7038 on poistettu ostoskorista koska sitä ei voi enää ostaa. Ota yhteyttä, jos tarvitset ohjeita.
- RIDGE CAP PRACTICE ML 4x300 mm, RAL 7038 has been removed from your cart because it can no longer be purchased. Please contact us if you need assistance.
Valve mirror Dancop, US Typ1 6080, dimensions 60 X 80 cm
355,00 € + KM
The eco-friendly UNI-SIG mirror helps to increase security on roads, industrial sites, underground car parks, shops and private roads. Reflective foil on the mirror plate makes the mirror visible even in bad weather conditions or in the dark, which helps minimise the risk of accidents.
Dimensions – 60 x 80 cm
Material – acrylic
Frame width – 2 cm
Frame height – 62,5 cm
Length of frame – 81.5 cm
Colour – red and white reflective tape on mirror surface, white rear body.
Weight – 5,9 kg
Observation distance – 9 – 15 m
Wind load – certified up to wind force 12 bales (hurricane > 117 km/h)
Internal use – yes
Outdoor use – yes, UV-resistant
Mounting – universal mounting on post or wall
Material from
The UNI-SIG mirror is made of acrylic material (70% more impact resistant than glass) and is equipped with a reflective film. Thanks to the sturdy material, the mirror is suitable for long-term outdoor use.
Fixing
The UNI-SIG mirror is supplied as a complete set with mounting brackets for fixing to a post (Ø50-85 mm) or wall. The fittings are made of strong galvanised galvanised steel, which can be adjusted in two directions. The mirror has passed the wind strength test with a wind speed scale of up to 12 knots, or hurricane > 117 km/h.
Related products
Valve mirror Dancop, BM 60-3, 360° view, diameter 60 cm
The Duncop Dome Mirror BM 360° dome mirror offers an excellent 360° view and is therefore particularly useful for monitoring activities in shops, for example. The mirror is a cost-effective and efficient way to prevent theft.
Diameter - 60 cm
Material - acrylic
Frame height - 23 cm
Diameter of frame - 65,5 cm
Diameter without frame - 60 cm
Depth - 29 cm
Weight - 1,1 kg
Observation distance - 16 - 20 m
Internal use - yes
For outdoor use - no
Fixing - fixing directly to the ceiling (using pre-drilled holes in the edge of the mirror) or with a chain. The chains are not included and can be purchased separately.
Material
TÜV-certified Dome BM 360° mirror is made of impact-resistant acrylic (70% more impact-resistant than glass). It has a light weight and a long lifetime. Because of the material, it can also be used in the food industry.
Fixing
The mirror can either be fixed directly to the wall or ceiling (with pre-drilled holes in the edge of the mirror) or fixed with chains. A set of labels can be purchased separately.
Valve mirror Dancop, BM 90-3, 360° view, diameter 90 cm
The Duncop Dome Mirror BM 360° dome mirror offers an excellent 360° view and is therefore particularly useful for monitoring activities in shops, for example. The mirror is a cost-effective and efficient way to prevent theft.
Diameter - 90 cm
Material - acrylic
Frame height - 37 cm
Diameter of frame - 95 cm
Diameter without frame - 90 cm
Depth - 37 cm
Weight - 2,3 kg
Observation distance - 30 - 40 m
Internal use - yes
For outdoor use - no
Fixing - fixing directly to the ceiling (using pre-drilled holes in the edge of the mirror) or by chain. The chains are not included and can be purchased separately.
Material
TÜV-certified Dome BM 360° mirror is made of impact-resistant acrylic (70% more impact-resistant than glass). It has a light weight and a long lifetime. Because of the material, it can also be used in the food industry.
Fixing
The mirror can either be fixed directly to the wall or ceiling (with pre-drilled holes in the edge of the mirror) or fixed with chains. A set of labels can be purchased separately.
Valve mirror Dancop, ED 40 X 60, dimensions 40 X 60 cm
A high quality acrylic laurel mirror for indoor and outdoor use. The safety mirror increases visibility and thus traffic safety when entering, exiting and at intersections with limited visibility.
Dimensions - 40 x 60 cm
Material - acrylic
Width of frame - 1,5 cm
Frame height - 51 cm
Frame length - 71 cm
Colour - white frame punase reflective RA2 foil coating
Weight - 3,3 kg
Observation distance - 9 - 15 m
Wind load - certified up to wind force 12 bales (hurricane > 117 km/h)
Internal use - yes
Outdoor use - yes, UV-resistant
Fixing - post or wall fixing with 4-point fixed ball joint
Description
TM traffic mirrors are recommended to improve road safety on streets, smaller roads and smaller paths with steep bends where there is a risk of blind spots. Mirrors can also be used in industrial areas where road users and pedestrians may be at risk of accidents. A reflective sticker on the front of the frame helps to minimise the risk of accidents, especially in bad weather and at night.
Material from
The mirror is made from acrylic, which is 70% more impact resistant than glass. The mirror is equipped with a 3M reflective foil and is TÜV-certified. The weather-resistant materials make the mirror particularly suitable for long-term outdoor use. The mirror is mounted in a UV-resistant frame with silicone, with additional reinforcement at the back. The silicone resists water and thus protects the mirror for a long time.
Fixing
The set includes a 4-point ball joint mounting bracket that helps to position the mirror at different angles. The sturdy bracket can withstand strong winds (the bracket has been tested with wind speeds up to 12 knots or hurricane > 117 km h) and can be mounted either directly on the wall or on a post bracket (Ø 50-85 mm).
Valve mirror Dancop, ED 60, diameter 60 cm
A high quality acrylic laurel mirror for indoor and outdoor use. The safety mirror increases visibility and thus traffic safety when entering, exiting and at intersections with limited visibility.
Diameter - 60 cm
Material - ppolymethylmethacrylate (PMMA), mirror glass made of acrylic.
Frame width - 5 cm
Frame diameter - 64 cm
Colour - white frame
Weight - 4,6 kg
Observation distance - 9 - 15 m
Internal use - yes
Outdoor use - yes, UV-resistant
Mounting - universal mounting on post (50-85 mm diameter)
Description
The EUvex all-purpose mirror is equipped with a white frame and can be used in a variety of places and for a variety of purposes.
Material from
The surface of the EUvex universal mirror is made of PMMA and is. UV and weather resistant.
Valve mirror Dancop, TM AC 60 X 80, dimensions 60 X 80 cm
A high quality acrylic laurel mirror for indoor and outdoor use. The safety mirror increases visibility and thus traffic safety when entering, exiting and at intersections with limited visibility.
Dimensions - 60 x 80 cm
Material - acrylic
Frame width - 2 cm
Frame height - 75 cm
Frame length - 95 cm
Colour - white Frame punase reflective RA2 foil
Weight - 8,8 kg
Observation distance - 15 - 22 m
Wind load - certified up to wind force 12 bales (hurricane > 117 km/h)
Internal use - yes
Outdoor use - yes, UV-resistant
Fixing - post or wall fixing with 4-point fixed ball joint
Description
TM traffic mirrors are recommended to improve road safety on streets, smaller roads and smaller paths with steep bends where there is a risk of blind spots. Mirrors can also be used in industrial areas where road users and pedestrians may be at risk of accidents. A reflective sticker on the front of the frame helps to minimise the risk of accidents, especially in bad weather and at night.
Material from
The mirror is made from acrylic, which is 70% more impact resistant than glass. The mirror is equipped with a 3M reflective foil and is TÜV-certified. The weather-resistant materials make the mirror particularly suitable for long-term outdoor use. The mirror is mounted in a UV-resistant frame with silicone, with additional reinforcement at the back. The silicone resists water and thus protects the mirror for a long time.
Fixing
The set includes a 4-point ball joint mounting bracket that helps to position the mirror at different angles. The sturdy bracket can withstand strong winds (the bracket has been tested with wind speeds up to 12 knots or hurricane > 117 km h) and can be mounted either directly on the wall or on a post bracket (Ø 50-85 mm).
Valve mirror Dancop, US TM-I 50, diameter 50 cm
The eco-friendly UNI-SIG mirror helps to increase security on roads, industrial sites, underground car parks, shops and private roads. Reflective foil on the mirror plate makes the mirror visible even in bad weather conditions or in the dark, which helps minimise the risk of accidents.
Diameter - 50 cm
Material - acrylic
Frame width - 3,5 cm
Frame diameter - 52 cm
Colour - white rear body
Weight - 3,8 kg
Observation distance - 5 - 7 m
Wind load - certified up to wind force 12 bales (hurricane > 117 km/h)
Internal use - yes
Outdoor use - yes, UV-resistant
Mounting - universal mounting on post or wall
Material from
The UNI-SIG mirror is made of acrylic material (70% more impact resistant than glass) and is equipped with a reflective film. Thanks to the sturdy material, the mirror is suitable for long-term outdoor use.
Fixing
The UNI-SIG mirror is supplied as a complete set with mounting brackets for fixing to a post (Ø50-85 mm) or wall. The fittings are made of strong galvanised galvanised steel, which can be adjusted in two directions. The mirror has passed the wind strength test with a wind speed scale of up to 12 knots, or hurricane > 117 km/h.
Valve mirror Dancop, US TM-I 60, diameter 60 cm
The eco-friendly UNI-SIG mirror helps to increase security on roads, industrial sites, underground car parks, shops and private roads. Reflective foil on the mirror plate makes the mirror visible even in bad weather conditions or in the dark, which helps minimise the risk of accidents.
Diameter - 60 cm
Material - acrylic
Frame width - 3,5 cm
Frame diameter - 60 cm
Colour - white rear body
Weight - 4 kg
Observation distance - 9 - 15 m
Wind load - certified up to wind force 12 bales (hurricane > 117 km/h)
Internal use - yes
Outdoor use - yes, UV-resistant
Mounting - universal mounting on post or wall
Material from
The UNI-SIG mirror is made of acrylic material (70% more impact resistant than glass) and is equipped with a reflective film. Thanks to the sturdy material, the mirror is suitable for long-term outdoor use.
Fixing
The UNI-SIG mirror is supplied as a complete set with mounting brackets for fixing to a post (Ø50-85 mm) or wall. The fittings are made of strong galvanised galvanised steel, which can be adjusted in two directions. The mirror has passed the wind strength test with a wind speed scale of up to 12 knots, or hurricane > 117 km/h.
Valve mirror Dancop, US TM-I 80100, dimensions 80 X 100 cm
The eco-friendly UNI-SIG mirror helps to increase security on roads, industrial sites, underground car parks, shops and private roads. Reflective foil on the mirror plate makes the mirror visible even in bad weather conditions or in the dark, which helps minimise the risk of accidents.
Dimensions - 80 x 100 cm
Material - acrylic
Frame width - 5 cm
Frame height - 81,5 cm
Frame length - 102 cm
Colour - white rear body
Weight - 9,1 kg
Observation distance - 15 - 22 m
Wind load - certified up to wind force 12 bales (hurricane > 117 km/h)
Internal use - yes
Outdoor use - yes, UV-resistant
Mounting - universal mounting on post or wall
Material from
The UNI-SIG mirror is made of acrylic material (70% more impact resistant than glass) and is equipped with a reflective film. Thanks to the sturdy material, the mirror is suitable for long-term outdoor use.
Fixing
The UNI-SIG mirror is supplied as a complete set with mounting brackets for fixing to a post (Ø50-85 mm) or wall. The fittings are made of strong galvanised galvanised steel, which can be adjusted in two directions. The mirror has passed the wind strength test with a wind speed scale of up to 12 knots, or hurricane > 117 km/h.
